MAPMT Base Board
| Front view of the MAPMT high
voltage baseboard. The MAPMTs plug into the custom designed sockets
shown (16 in total). Two MAPMTs are shown. The spacing between tubes is to
allow for a mu-metal magnetic shield.
|
Back view of MAPMT HV base
board: One can see the large number of surface mount components which
comprise the individual 12-stage voltage divider chains. Also visible are
the 8 readout 34-pin fine pitch connectors (serving 2 MAPMTs). The
machined holes in the center of each field are to clearances for the
vacuum post extending from the back of the MAPMT.
|
Electrical Layouts
| Layer | Components / Routing |
| Top | 9x9 PGA Socket (Samtec CPAS-030-ZUGG-09BD) |
| Signal Layer 1 | Signal Routing |
| Signal Layer 2 | Signal Routing |
| Ground Layer | Ground Routing |
| Power Layer 1 | Dynode HV Routing |
| Power Layer 2 | Dynode HV Routing |
| Bottom | Surface
Mount Resisitors & Caps 34-pin Output connector (Samtec FTSH-117-01-L-D) |